Elastomeric materials

Free from viscosity limitations, VLM resins can include a high fraction of oligomers to obtain a loosely crosslinked polymer network. This structure can flexibly withstand mechanical stresses, behaving similarly to industrial-grade molded elastomers or vulcanized rubbers, and surpassing any traditional AM photopolymer.

Rubber-like elastomers

Elastomers with high flexibility and tear strength, providing great energy return and responsiveness making them ideal for applications requiring durability, high rebound, and the ability to undergo a repeated stress without permanent damage.


Elastomer engineered to dissipate energy with a great compression set. It is ideal to absorb shocks, reduce noise or damp vibrations.


Casted or extruded silicones are widely used in the industry because of their perfect balance between durability, tear resistance, thermal stability, UV resistance, and biocompatibility, among others. While VLM is capable of processing pure silicones thanks to its wide viscosity processing window, most of the AM alternatives can’t. Instead, they offer silicone-acrylates or silicone-polyurethanes that are far from the performance of pure silicones.

Automotive / Aerospace gaskets
Audiology hearing aids

Why does viscosity matter?​

To extend the available ingredient set

Low-viscosity resins can’t meet industrial standards and homologations due to the limited ingredient set available to keep viscosity within the processability range. Therefore, legacy formulations are predominantly formed by monomers and a very small fraction of oligomers, additives, fillers and modifiers can be  used since its inclusion spike viscosity  out of the processing window. Consequently, low-viscosity resins will inevitably have compromised mechanical, thermal and chemical and performance.

To strengthen the polymer matrix

During photopolymerization, monomers and oligomers bond covalently at their terminations, forming a matrix that is crucial for the final material properties. As low-viscosity resins are mostly formed by short-chain monomers, the are many more covalent bonds in the matrix, and it becomes inevitably over-crosslinked, leading to brittle parts that are prone to crack propagation from weakened bonds at functional termination, and inferior elastomeric behavior because of poor tear strength or elongation at break.

To avoid material thermal aggression

Some AM processes rely on heating up the material to lower its viscosity and enable its processing, but this has several drawbacks: The material undergoes curing reactions when exposed to heat, leading to inconsistent properties among layers as the last ones are affected by partial curing during a longer pre-heating period. Moreover, heat increases the VOC emissions, which pose serious health risks and require expensive equipment in the facilities to ensure a safe work environment.